Weider Home Gym 831150460 User Manual

PATENT PENDING  
USER'S MANUAL  
Model No. 831.150460  
Serial No.  
The serial number can be found in the  
location shown below. Write the serial  
number in the space above.  
Serial Number Decal (under  
CAUTION  
Read all precautions and instruc-  
tions in this manual before  
using this equipment. Save this  
manual for future reference.  
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179  
 
BEFORE YOU BEGIN  
Thank you for selecting the WEIDER® PRO 120  
Weight Bench. The PRO 120 Weight Bench is  
designed to be used with your own weights (not  
included) to develop several muscle groups. Whether  
your goal is a shapely figure, dramatic muscle size  
HELPLINE at 1-800-736-6879, Monday through  
Saturday, 7 a.m. until 7 p.m. Central Time (excluding  
holidays). To help us assist you, please note the prod-  
uct model number and serial number before calling.  
The model number is 831.150460. The serial number  
and strength, or a healthier cardiovascular system, the can be found on a decal attached to the PRO 120  
PRO 120 Weight Bench will help you to achieve the  
specific results you want.  
Weight Bench (see the front cover of this manual).  
Before reading further, please review the drawing  
below and familiarize yourself with the parts that are  
labeled.  
For your benefit, read this manual carefully before  
using the WEIDER® PRO 120 Weight Bench. If you  
have additional questions, please call our toll-free  
Backrest  
Foam Pads  
Lock Pins  
Pivot Leg  
Foam Pads  
Adjustment Leg  
3
 
ASSEMBLY  
Before beginning assembly, carefully read the  
following information and instructions:  
• Tighten all parts as you assemble them, unless  
instructed to do otherwise.  
• Place all parts in a cleared area and remove the  
packing materials; do not dispose of the packing  
materials until assembly is completed.  
• During assembly, make sure that all parts are ori-  
ented as shown in the drawings.  
• Read each assembly step before you begin.  
THE FOLLOWING TOOLS (NOT INCLUDED) ARE  
REQUIRED FOR ASSEMBLY:  
• For help identifying the small parts used in  
assembly, use the part identification chart  
below. The number in parenthesis below each  
part refers to the key number of the part. The  
second number refers to the quantity needed for  
assembly. Note: Some small parts may have  
been pre-attached for shipping purposes. If a  
part is not in the parts bag, check to see if it  
has been pre-attached.  
• Two (2) adjustable wrenches  
Assembly will be more convenient if you have the  
following tools: A socket set, a set of open-end or  
closed-end wrenches, or a set of ratchet wrenches.  
M6 x 48mm Bolt (4)–2  
M10 x 68mm Bolt (14)–1  
M6 x 16mm Bolt (5)–2  
3/4" Round Inner Cap (7)–4  
M10 Nylon Locknut (13)–1  
38mm x 38mm Inner Cap (16)–1  
38mm x 50mm Inner Cap (8)–1  
50mm Round Outer Cap (9)–4  
4
 
1. Before beginning assembly, be sure that you  
have read and understand the information on  
the previous page.  
1
8
Press a 38mm x 38mm Inner Cap (16) into the end  
of the Frame (1). Press Two 50mm Round Outer  
Caps (9) onto the Adjustment Leg (3). Press a  
38mm x 50mm Inner Cap (8) into the end of the  
Adjustment Leg.  
3
Align these  
Holes  
11  
1
Align the indicated holes in the Frame (1) and the  
Adjustment Leg (3). Attach the Adjustment Leg to  
the Frame with two Lock Pins (11).  
16  
2
9
2. Align the indicated holes. Attach the Pivot Leg (2) to  
the Frame (1) with the M10 x 68mm Bolt (14) and  
the M10 Nylon Locknut (13).  
1
Align these  
Holes  
Secure the Pivot Leg (2) by inserting the “LPin (15)  
through the indicated hole in the Pivot Leg and the  
corresponding hole in the Frame (1).  
13  
15  
14  
2
Press Two 50mm Round Outer Caps (9) onto the  
Pivot Leg (2).  
9
3. Press 3/4” Round Inner Caps (7) into the ends of  
both Pad Tubes (10).  
3
Insert the Pad Tubes (10) through the Adjustment  
Leg (3).  
6
3
7
10  
Slide Foam Pads (6) onto the ends of both Pad  
Tubes (10).  
7
6
4. Attach the Bench (12) to the Frame (1) with two M6  
x 48mm Bolts (4) and two M6 x 16mm Bolts (5).  
4
12  
1
4
5
5
 
ADJUSTING THE WEIDER PRO 120  
The weight bench is designed to be used with your own weights (not included). The steps below explain how the  
weight bench can be adjusted. Refer to the accompanying exercise poster for exercise information.  
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The  
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.  
ADJUSTING THE PIVOT LEG  
1
To change the position of the Pivot Leg (2), remove the  
15  
LPin (15). Align the other set of holes in the Pivot Leg  
and the Frame (1). Re-insert the “LPin.  
2
ADJUSTING THE LEVEL OF THE BENCH  
12  
To change the level of the Bench (12), remove both  
Lock Pins (11) from the Frame (1) and Adjustment Leg  
(3). Align the set of holes in the Frame with another set  
of holes in the Adjustment Leg. Re-insert the Lock Pins.  
Always use both Lock Pins.  
1
11  
3
6
 
PART LIST and  
EXPLODED DRAWING—Model No. 831.150460  
R0996A  
Key  
No.  
Part  
No.  
Key  
No.  
Part  
No.  
Qty.  
Description  
Qty.  
Description  
1
2
3
4
5
6
7
8
9
1
1
1
2
2
4
4
2
4
132209 Frame  
132504 Pivot Leg  
10  
11  
12  
13  
14  
15  
16  
#
2
2
1
1
1
1
1
1
1
132148 Pad Tube  
132505 Lock Pin  
132210 Bench  
012033 M10 Nylon Locknut  
111084 M10 x 68mm Bolt  
105977 “L Pin  
103833 38mm x 38mm Inner Cap  
132207 User’s Manual  
132506 Adjustment Leg  
111855 M6 x 48mm Bolt  
132137 M6 x 16mm Bolt  
103805 Foam Pad  
112402 3/4” Round Inner Cap  
132142 38mm x 50mm Inner Cap  
100290 50mm Round Outer Cap  
#
132208 Exercise Poster  
12  
1
11  
4
8
6
7
13  
16  
5
10  
6
7
2
15  
14  
7
9
9
6
9
3
9
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover  
of this manual for information about ordering replacement parts.  
7
 
The model number and serial number of your WEIDER® PRO 120  
are listed on a decal attached to the frame. See the front cover of  
this manual to find the location of the decal.  
Model No. 831.150460  
QUESTIONS?  
If you find that:  
All replacement parts are available for immediate purchase or  
special order when you visit your nearest SEARS Service Center.  
To request service or to order parts by telephone, call the toll-free  
numbers listed at the left.  
• you need help assembling or  
operating the WEIDER® PRO 120  
When requesting help or service, or ordering parts, please be pre-  
pared to provide the following information:  
• a part is missing  
• or you need to schedule repair  
service  
• The MODEL NUMBER of the product (831.150460).  
• The NAME of the product (WEIDER® PRO 120).  
call our toll-free HELPLINE  
1-800-736-6879  
Monday–Saturday, 7 am–7 pm  
Central Time (excluding holidays)  
• The PART NUMBER of the PART (see the PART LIST and the  
EXPLODED DRAWING on page 7 of this manual).  
• The DESCRIPTION of the PART (see the PART LIST and the  
EXPLODED DRAWING on page 7 of this manual).  
REPLACEMENT  
PARTS  
If parts become worn and need to  
be replaced, call the following toll-  
free number  
1-800-FON-PART  
(1-800-366-7278)  
FULL 90 DAY WARRANTY  
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this  
SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the  
United States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.  
This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental  
purposes.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state.  
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179  
Part No. 132207 R0996A  
Printed in China © 1996 Sears, Roebuck and Co.  
 

Weider Home Gym 831159730 User Manual
West Bend Fondue Maker ELECTRIC FONDUE POT User Manual
Western Digital Computer Drive Portable Hard Drive User Manual
Westinghouse MP3 Player DPF 0802 User Manual
White Rodgers Thermostat 1E65 144 User Manual
Woodstock Saw W1703 W1714 User Manual
Xantech TV Mount CSPLCD39RMP User Manual
Xerox Printer Phaser 750 User Manual
Zanussi Plumbing Product 132300 User Manual
Zanussi Washer Dryer WIJ1075 User Manual