Whirlpool Clothes Dryer WGD86HEB User Manual

Gas Dryer  
PRODUCT MODEL NUMBERS  
WGD70HEB, WGD80HEB, WGD86HEB,  
WGD88HEA, WGD94HEA, WGD96HEA  
Front view:  
Side view:  
27"  
(686 mm)  
381/8"  
(968 mm)  
3
/4"*  
(18 mm)  
Back view:  
Recommended Installation Spacing:  
61/4"  
(159 mm)  
3"  
(76 mm)  
18" min.  
(457 mm)  
48 in.2 min.  
(310 cm2)  
Water inlet  
(Steam Models Only)  
297/8"*  
(759 mm)  
53/4"*  
(146 mm)  
31/2"*  
(89 mm)  
Vent  
Gas  
24 in.2 min.  
(155 cm2)  
5"  
3"  
(76 mm)  
(127 mm)  
61/8"*  
(156 mm)  
3/4"*  
(18 mm)  
143/8"  
1"  
(25 mm)  
1"  
(25 mm)  
(365 mm)  
253/4"  
(654 mm)  
* 0" (0 mm) spacing is allowed.  
NOTE: Most installations require a minimum of 5" (127 mm) clearance  
behind dryer for exhaust vent with elbow. See “Venting Requirements”.  
Installation spacing for recessed area or closet installation  
The dimensions shown below are for the recommended spacing for this dryer.  
Additional spacing should be considered for ease of installation and servicing.  
Additional clearances might be required for wall, door, and floor moldings, and dryer venting.  
Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.  
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required.  
Louvered doors with equivalent ventilation openings are acceptable.Companion appliance spacing should also  
be considered.  
W10558994  
01/2013  
 

Whirlpool Range WF30785 User Manual
Whirlpool Refrigerator 2302309 User Manual
White Rodgers PDAs Smartphones 50D50 843 User Manual
Williams Furnace 2509621 User Manual
Winegard Cell Phone Accessories TN 2033 User Manual
Xtant Speaker A212 User Manual
XtremeMac Greenhouse Kit XGC 1e User Manual
Yamaha CD Player CDR D651 User Manual
Zanussi Microwave Oven MW500 User Manual
Zenoah Trimmer SRTZ2601F User Manual