Xerox Network Card OS 2 WARP 40 User Manual

OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card  
Xerox Document Centre 240/255/265 LP/ST  
d) Once enabled the Physical Media  
Before You Start  
b) On the keypad enter 1111 or the  
current password. Press the Enter  
button when finished. If your printer is  
an ST model press the Go to Tools  
button, otherwise skip to the next step.  
portion of the screen will appear.  
Press the corresponding button to  
select one of the following, NetBEUI/  
Ethernet or NetBEUI/Token Ring.  
After making your selection press  
Save.  
If your printer is equipped with a Token Ring  
interface, use the Token Ring Quick Install  
Card supplied in this Quick Install Card set to  
set the Ring Speed and Source Routing settings  
for your environment.  
c) The Touch Screen will be used for the  
remainder of the data entry.  
5.  
Assign the Workgroup and Host Names.  
Record the following information  
3.  
4.  
Enable Microsoft Network printing.  
a) You will be returned to the previous  
screen, press the Workgroup and  
Host button.  
Network Interface Type ___________________  
Workgroup Name _______________________  
SMB Host Name ________________________  
Printer Name ___________________________  
OPTIONAL INFORMATION:  
a) Press the Connectivity and Network  
Setup button.  
b) At the next screen, press the Network  
Setup button.  
b) At the next screen, press the  
Workgroup Name button. Using the  
touch panel keys, enter the name of  
the workgroup in which you want the  
printer to appear then press Save.  
Enable the Protocol and Media  
a) At the next screen, press the  
Microsoft Networking button.  
c) You will be returned to the previous  
screen. Press the SMB Host Name  
button, using the touch panel keys,  
enter the desired text for this item then  
press Save.  
b) At the next screen, press the  
Transport and Media button.  
SMB Host Description ____________________  
Printer Description _______________________  
c) At the next screen, press the Enable  
button to enable the Microsoft Network  
protocols.  
d) OPTIONAL STEP: Press the SMB  
Host Description button, enter the  
desired text then press Save. You will  
be returned to the previous screen.  
Go to the printer and...  
1.  
2.  
Connect your Document Centre to the  
network with the appropriate cabling.  
e) Press Save again to return to the  
Enter the Tools pathway  
previous screen.  
a) Press the Access ( )button.  
For assistance, contact your local Xerox Customer Support Center:  
USA: 1-800-821-2797 Canada: 1-800-939-3769  
Page 1  
 
OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card  
Xerox Document Centre 240/255/265 LP/ST  
r) Double-click on the Connections  
d) Click the Install new printer driver...  
Icon.  
button.  
s) Double-Click on Printers.  
e) Select Other OS/2 printer driver.  
t) Close the Connections Window.  
f) Enter the correct directory in the  
appropriate field.  
u) Double Click on Printer in the Printers  
window. DO NOT CHOOSE THE  
NETWORK PRINTER OPTION.  
g) Click the Refresh button.  
h) Click the Install button after you see  
v) Enter a name for the local queue in the  
Printer window. (Overwrite the printer  
that already appears with something  
unique - this does not have to be the  
share or hostname of the printer).  
the driver description appear.  
i) Click the OK button to confirm that the  
driver has been installed.  
4.  
Highlight the OS/2 driver in the Default  
printer driver window and click the  
Create button.  
w) Make sure the cursor is still in the  
printer window and press the Enter  
key on the keyboard.  
5.  
6.  
Close the Printers window.  
You are now ready to print to the local  
queue created in step 2v.  
x) Select familiar w/ OS/2 if prompted.  
y) Highlight the correct lpt port (assigned  
in step 2m).  
7.  
8.  
Print a test job.  
Check your test job for quality and use the  
problem solving section of the Document  
Centre 240/255/265 Reference Guide for  
resolving print defects.  
3.  
Install a new printer driver.  
a) Insert CentreWare CD 2 into your CD-  
ROM drive.  
9.  
If your print job does not print, refer to the  
troubleshooting section in the document  
entitled Network Installation and  
Troubleshooting Guide to correct the  
problem.  
b) Make a /desktop/drivers directory from  
an OS/2 Window.  
c) Copy the driver files from the CD-ROM  
disk to the /desktop/drivers directory.  
Page 3  
 

Weslo Treadmill WLTL39092 User Manual
West Bend Fryer 72212 User Manual
Whirlpool Air Conditioner ACQ052PK0 User Manual
Whirlpool Ice Maker GI15NFLTB0 User Manual
Wolf Cooktop CT15E S User Manual
Woodstock Grinder D3978 User Manual
Woodstock Welder W1764 User Manual
Xantech Universal Remote 490 95 User Manual
Zanussi Cooktop ZKT631DX User Manual
Zanussi Freezer ZVR 45 R User Manual