Yamaha Home Theater System HTR 6030 User Manual

STEP 2: Connect other home theater components  
(optional)  
YHT-185 Digital Home Theater System  
5
6
GARK  
En  
System Connection Guide  
CAUTION  
© 2007  
All rights reserved.  
Components must not be plugged in while connecting them. Wait until all connections are made before  
Printed in China  
WJ99940  
plugging in your components.  
AUDIO  
L
VIDEO  
R
Yamaha created this package to greatly enhance your audio and home theater enjoyment.  
This System Connection Guide will help you get started. Follow the steps to connect the  
speakers first. Then connect your video monitor, DVD Player and other components.  
Refer to your Owner’s Manuals as well as those that came with your other components for  
complete instructions and precautions.  
IN  
HTR-6030  
4
5
6
1
OUT  
Be sure that all components are not plugged in while making connections.  
ANT.  
VIDEO  
S-VIDEO  
DVR/VCR  
HTR-6030  
STEP 1: Unpack and connect speakers  
Connect a DVR/VCR  
Video monitor  
Connect DVR IN/OUT jacks of the receiver and the input/output jacks of your  
component using RCA audio/video cables (not included) as shown.  
1
2
5
1
2
3
HTR-6030  
To the front right speaker (1)  
To the front left speaker (2)  
Connect a video monitor  
Connect front speakers  
6
NX-C270  
Connect the MONITOR OUT jack of the receiver and the video input jack of your video  
monitor using an RCA video cable (not included).  
Connect speaker wires for front speakers (1, 2). The positive (+) side of the wire with the  
white stripe attaches to the red terminal. The negative (–) side attaches to the black terminal.  
CAUTION  
NX-E270  
7
3
4
Receiver must not be plugged in while connecting speakers.  
2
3
4
HTR-6030  
HTR-6030  
NX-E270  
SW-P270  
Inspect contents  
After unpacking, inspect the contents to confirm you have the above items:  
NX-E270 two front speakers (1, 2), NX-E270 two surround speakers (3, 4),  
NX-C270 one center speaker (5), SW-P270 powered subwoofer (6),  
HTR-6030 AV Receiver (7) with remote control. Also included, but not shown, are  
five speaker wires, one subwoofer cable, AM and FM antennas, fasteners, non-skid  
pads, and three related Owner’s Manuals.  
CD player  
HTR-6030  
To the center speaker  
(5)  
Connect a CD player  
To the surround  
right speaker (3)  
To the surround left  
speaker (4)  
Connect CD jacks of the receiver and the output jacks of your CD player using RCA  
audio cables (not included).  
DVD player  
Connect surround and center speakers  
HTR-6030  
Connect speaker wire for surround speakers (3, 4) and center speaker (5). The positive  
(+) side of the wire with the white stripe attaches to the red terminal. The negative (–) side  
attaches to the black terminal.  
7
8
Connect a DVD player (video)  
6
1
1 Front right speaker  
2 Front left speaker  
3 Surround right speaker  
4 Surround left speaker  
5 Center speaker  
CAUTION  
Connect the DVD VIDEO IN jack of the receiver and the video output jack of your  
DVD player using an RCA video cable (not included).  
Receiver must not be plugged in while connecting speakers.  
2
5
3
6 Subwoofer  
HTR-6030  
MD/CD recorder  
4
HTR-6030  
Connect an MD/CD recorder  
Connect MD/CD-R IN/OUT jacks of the receiver and the input/output jacks of your  
components using RCA audio cables (not included) as shown.  
Place speakers  
Place speakers so they appear in the approximate positions as shown in the diagram  
above. See your Owner’s Manual for more information on speaker placement and  
mounting.  
SW-P270  
DVD player  
HTR-6030  
Connect the subwoofer  
Connect the subwoofer cable to the subwoofer (6). Set subwoofer VOLUME control to  
half-way mark and POWER to OFF (rear panel).  
CAUTION  
STEP 3: Plug in  
Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver  
first, then the subwoofer and other components. Please see each of your respective Owner’s  
Manuals for recommended guidelines and settings.  
Connect a DVD player (audio)  
Components must not be plugged in while connecting them.  
Connect the DVD DIGITAL INPUT jack of the receiver and the digital output jack of your  
DVD player using a coaxial cable (not included).  
70 mm  
HTR-6030  
7
NX-E270  
NX-C270  
Connect speaker wires  
Enjoy the Yamaha Home Theater experience  
Connect speaker wire for front speakers (1, 2), surround speakers (3, 4), and  
center speaker (5). The positive (+) side of the wire with the white stripe attaches to  
the red terminal. The negative (–) side attaches to the black terminal. See your  
Owner’s Manual for more information on speaker wire connections.  
• Be sure to put batteries in your remote control (see Owner’s Manual for instructions).  
• Refer to your Owner’s Manuals for each component in your system for more  
information.  
Connect antennas  
DSS/Cable/HDTV  
tuner box  
You can simply operate the receiver by using the SCENE function (see page 4 in the  
Owner’s Manual of HTR-6030).  
Keeping receiver unplugged, connect AM loop antenna and indoor FM antenna as shown.  
For more information about obtaining clear reception and grounding, see your Owner’s  
Manual.  
HTR-6030  
Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system.  
Connect a DSS/Cable/HDTV tuner box  
Connect the DTV/CBL jacks of the receiver and the output jacks of your set-top box using  
RCA audio/video cables (not included) as shown.  
 

Windsor Vacuum Cleaner 10120380 User Manual
Yamaha Computer Drive CRW3200SX User Manual
Yamaha Music Mixer EN55103 1 User Manual
Yamaha Network Card DSP1D User Manual
Yamaha Stereo System CDC 600BL User Manual
Yamaha Welding System EF6300iSDE User Manual
Zanussi Clothes Dryer TC 450 User Manual
Zanussi Refrigerator Z 22 5 W User Manual
Zebra Technologies Tablet Accessory 7309 User Manual
Zenith Speaker System XBS344 User Manual