Yamaha Musical Instrument CV820WB User Manual

Changing the Locking Blocks  
Owner’s Manual  
CV820WB  
1 Remove the old strings. (Refer to the “Removing the old strings”  
5 Set the locking bolt.  
section in the FC Tremolo System Manual.)  
CV820WB Control System  
About Wes Borland’s String Gauges  
The CV820WB is the Wes Borland signature guitar  
model.The unique string gauges and tunings used by  
Wes Borland are given below.  
Bridge Pickup  
Neck Pickup  
2 Loosen the FC nut locking lever, and remove the locking lever.  
Sting  
1st  
Tuning  
C#  
G#  
E
Gauge  
.011  
2nd  
3rd  
4th  
.014  
.022 (Wound)  
.032 (Wound)  
.042 (Wound)  
.052 (Wound)  
B
5th  
F#  
C#  
6th  
Pickup Selector  
Neck Pickup  
Neck Pickup Volume  
Bridge Pickup Volume  
The guitar is strung with .010–.046 gauge strings when  
shipped from the factory. In order to use the same gauge  
strings asWes Borland you will need to change the locking  
blocks in the FC nut.The procedure given in the following  
section describes how to change the locking blocks.  
Mix  
Bridge Pickup  
Loosen  
6 Re-attach the locking lever and tighten lightly.  
FC Nut Part Names  
3 Remove the locking bolt.  
FC Nut  
FC Nut Components  
Locking Block 1: for strings 1–3 (wider width)  
(x2) replacement blocks are included *1  
Locking Block 3 (x1)  
Locking Bolt (x1)  
Tighten  
Locking Block 2: for strings 4–6 (narrower width)  
(x2) replacement blocks are included *1  
Locking Lever x1  
7 This completes locking block replacement. Install the new strings  
and tune the guitar. (Refer to the “Installing the new strings” section  
in the FC Tremolo System Manual.)  
*1 : About locking blocks 1 and 2  
Included with the guitar is a set of locking blocks that fit the string gauges used by Wes  
Borland. Please note that the width of each locking block is different.  
4 Replace the locking blocks 1 and 2.  
* Set the wider blocks for  
the 1st–3rd strings.  
Supplied Replacement: For Wes Borland Gauge  
(.011–.052)  
For Normal Gauge Strings  
(.009–.042/.010–.046, etc.)  
Fingerboard side  
Fingerboard side  
Head side  
Head side  
Locking Block 1  
6.8 mm wide  
(0.268 inch)  
6.6 mm wide  
(0.260 inch)  
1st–3rd strings (wide)  
Marked “1”  
Unmarked  
* Set the narrower blocks to  
the 4th–6th strings.  
Fingerboard side  
Fingerboard side  
Head side  
Head side  
* Store the set of locking blocks you removed from the guitar  
in a safe place for future use.  
Locking Block 2  
6.0 mm wide  
(0.236 inch)  
6.2 mm wide  
(0.244 inch)  
4th–6th strings (narrow)  
Unmarked  
Marked “2”  
 

Weslo Treadmill 831295020 User Manual
Westinghouse Indoor Furnishings 120112 User Manual
Whirlpool Dryer Accessories WTW5600SQ0 User Manual
Whirlpool Refrigerator 4YED27DQDN00 User Manual
Whirlpool Washer Dryer LTG5243DZ0 User Manual
X10 Wireless Technology Washer IN60A User Manual
Xerox Copier XE3021RU0 2 User Manual
Yamaha Musical Instrument Amplifier HY 10GII User Manual
Yamaha Speaker IF2112 User Manual
Zenoah Brush Cutter BC2603DL User Manual