G B
AX-496/396
STEREO AMPLIFIER
AMPLIFICATEUR STEREO
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Thank you for selecting this YAMAHA stereo amplifier.
FEATURES
AX-496
ⅷ
85W + 85W (8Ω) RMS Output Power, 0.019% THD, 20–20,000 Hz
AX-396
60W + 60W (8Ω) RMS Output Power, 0.019% THD, 20–20,000 Hz
Highly Dynamic Power, Low Impedance Drive Capability
Continuously Variable LOUDNESS Control
ⅷ
ⅷ
ⅷ
ⅷ
CD/DVD DIRECT AMP Switch Used to Reproduce the Purest CD and DVD Sound
Remote Control Capability
AX-496 only
REC OUT Selector Independent of Input Source Selection
ⅷ
ⅷ
PURE DIRECT Switch Used to Reproduce the Purest Source Sound
CONTENTS
UNPACKING ............................................................................. Inside of Front Cover
FEATURES ............................................................................................................... 1
CAUTION ...................................................................................................................2
NOTES ABOUT THE REMOTE CONTROL.............................................................. 3
CONNECTIONS........................................................................................................ 4
CONTROLS AND THEIR FUNCTIONS .................................................................... 6
OPERATION ............................................................................................................. 9
TROUBLESHOOTING ............................................................................................ 13
SPECIFICATIONS................................................................................................... 14
E-1
CAUTION: Read this before operating your unit.
1. To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
2. Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical
shock, do not expose the unit to rain or water.
3. Never open the cabinet. If something drops into the
SPECIAL INSTRUCTIONS FOR U.K. MODEL
set, contact your dealer.
IMPORTANT:
4. Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the
power plug and the wires connected to other
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
equipments. Never pull the wires themselves.
5. The openings on the unit cover assure proper
ventilation of the unit. If these openings are
obstructed, the temperature inside the unit will rise
rapidly; therefore, avoid placing objects against these
openings. Install the unit in a well-ventilated area to
prevent fire or damage.
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows: The wire which is coloured BLUE must be
connected to the terminal which is marked with the letter
N or coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED. Making sure
that neither core is connected to the earth terminal of the
three pin plug.
Be sure to allow a space of at least 20 cm behind, 20
cm on both sides and 30 cm above the top panel of the
unit to prevent fire or damage.
6. The voltage used must be the same as that specified
on this unit. Using this unit with a higher voltage than
specified is dangerous and may result in fire or other
accidents. YAMAHA will not be held responsible for
any damage resulting from use of this unit with a
voltage other than specified.
When this unit is turned off by pressing the STANDBY/ON
switch on the front panel or the remote control, the
STANDBY indicator on the front panel lights up. This
state is called the standby mode. In this mode, this unit is
designed to consume a small amount of power. This
unit’s power supply cannot be completely cut off from the
AC line until the POWER switch on the front panel is set
in the OFF position or the AC power cord is disconnected.
7. Always set the VOLUME control to “ ” before starting
∞
the audio source play. Increase the volume gradually
to an appropriate level after the play has been started.
8. Do not attempt to clean the unit with chemical solvents
as this might damage the finish. Use a clean, dry
cloth.
9. Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding
that the unit is faulty.
WARNING
Do not change the IMPEDANCE SELECTOR switch
setting while the power to this unit is on, otherwise
this unit may be damaged.
10. When not planning to use this unit for a long period
(ie., vacation, etc.), disconnect the AC power plug from
the wall outlet.
If this unit fails to turn on when the POWER switch is
pressed:
The IMPEDANCE SELECTOR switch may not be set to
either end. If so, set the switch to either end when this
unit’s power supply is completely cut off.
11. To prevent lightning damage, disconnect the AC power
plug when there is an electric storm.
12. Grounding or polarization – Precautions should be
taken so that the grounding or polarization of an
appliance is not defeated.
(Europe model)
MINS
SPEAKERS
IMPEDANCE SELECTOR
SET BEFORE POWER ON
AC OUTLETS
SWITCHED
13. Do not connect any audio equipment to the AC outlet
on the rear panel if the equipment requires more power
than the outlet is rated to provide.
L
l00W MAX. TOTAL
A
OR
A
B
B
:
:
6
Ω
MIN. /SPEAKER
I2
Ω
MIN. /SPEAKER
EE INSTRUCTION MANUAL FOR CORRECT SETTING.
A
OR
A
B
B
:
:
4
Ω
Ω
MIN. /SPEAKER
MIN. /SPEAKER
8
IMPEDANCE SELECTOR
E-2
NOTES ABOUT THE REMOTE CONTROL
Battery installation
Remote control operation range
Since the remote control will be used for many of this unit’s
control operations, you should begin by installing the
supplied batteries.
1. Turn the remote control over and remove the battery
compartment cover by sliding it in the direction of the
arrow.
2. Insert the batteries (AA, R6, UM-3 type) according to the
polarity markings on the inside of the battery
compartment.
Remote control
sensor
3. Close the battery compartment cover.
1
Within approximately
6 m (19.7 feet)
3
2
Notes
● The area between the remote control and the main unit
must be clear of large obstacles.
Battery replacement
If you notice that the remote control must be used closer to
the main unit, the batteries are weak. Replace both
batteries with new ones.
● Do not expose the remote control sensor to strong
lighting, in particular, an inverter type fluorescent lamp;
otherwise, the remote control may not work properly. If
necessary, position the main unit away from direct
lighting.
Notes
● Use AA, R6, UM-3 batteries.
● Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
● Remove the batteries if the remote control is not used for
an extended period of time.
● If batteries leak, dispose of them immediately. Avoid
touching the leaked material and contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
E-3
CONNECTIONS
Caution: Plug in this unit and other components after all connections are completed.
● All connections must be correct, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also refer to the owner’s
manual for each of your components.
● Use RCA type pin plug cables for audio/video units except speakers.
● The output (or input) terminals of YAMAHA audio/video units numbered 1, 2, 3, 4, etc. on the rear panel must be
connected to the same-numbered terminals of this unit.
Turntable
Tuner
Speakers A
Tape deck, etc.
Right
Left
(Europe model)
R
L
TUNER
2
3
4
3
4
MINS
IN
(PLAY)
SPEAKERS
IMPEDANCE SELECTOR
SET BEFORE POWER ON
AC OUTLETS
SWITCHED
R
L
L
R
l00W MAX. TOTAL
TAPE
OUT
(REC)
PHONO
A
B
IN
(PLAY)
GND
A
OR
A
B
B
:
:
6
Ω
MIN. /SPEAKER
MD
I2
Ω
MIN. /SPEAKER
OUT
(REC)
1
AUX
CD/DVD
CAUTION :SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
A
OR
A
B
B
:
:
4
Ω
Ω
MIN. /SPEAKER
MIN. /SPEAKER
R
L
R
L
8
1
2
*
*
3
*
To AC outlet
Left
Right
CD player or
DVD player
Video cassette player,
etc.
Speakers B
MD recorder, etc.
1
2
3
,
,
:
Refer to page 5 for descriptions.
: Indicates the direction of signals.
* * *
E-4
Connecting speakers
Connect the SPEAKERS terminals to your speakers with
the wire with the proper gauge (keep it as short as
possible). If the connections are faulty, no sound will be
heard from the speakers. Make sure that the + and –
polarity markings of the speaker wires are observed and set
correctly. If these wires are reversed, the sound will be
unnatural and lack bass.
● One or two speaker systems can be connected to this
unit. If you use only one speaker system, connect it to
either the SPEAKERS A or B terminals.
● Use speakers with the specified impedance shown on the
rear of this unit.
● <Australia, China and General models only>
Banana Plug connections are also possible. Simply
insert the Banana Plug connector into the corresponding
terminal.
Caution
Do not let the bare speaker wires touch each other or
any metal part of this unit. This could damage this unit
or the speakers, or both.
How to Connect:
Red: positive (+)
Black: negative (–)
1 Loosen the knob.
2
2 Insert the bare wire.
1
[Remove approx.
10 mm (3/8”)
insulation from the
3
speaker wires.]
3 Tighten the knob
and secure the wire.
Rear panel parts
1
2
AC OUTLET(S) (SWITCHED)
*
IMPEDANCE SELECTOR switch
*
(Europe, China and General models)
WARNING
...................................................... 3 SWITCHED OUTLETS
(U.K. and Australia models)............. 1 SWITCHED OUTLET
Do not change the IMPEDANCE SELECTOR switch
setting while the power to this unit is on, otherwise
this unit may be damaged.
Use these to connect the power cords of your components
to this unit.
If this unit fails to turn on when the POWER switch is
pressed:
The IMPEDANCE SELECTOR switch may not be set to
either end. If so, set the switch to either end when this
unit’s power supply is completely cut off.
The power to the SWITCHED outlets is controlled by this
unit’s POWER or STANDBY/ON switch. These outlets will
supply power to any connected unit whenever this unit is
turned on.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLETS is 100W.
A
OR
A
B
B
:
:
6
Ω
MIN. /SPEAKER
Select the position whose
requirements your speaker
system meets.
I2
Ω
MIN. /SPEAKER
3
GND terminal (For turntable use)
A
OR
A
B
B
:
:
4
Ω
Ω
MIN. /SPEAKER
MIN. /SPEAKER
8
*
Connecting the ground wire of the turntable to the GND
terminal will normally minimize hum, but in some cases
better results may be obtained with the ground wire
disconnected.
(Right position)
If you use one pair of speakers, the impedance of
each speaker must be 4Ω or higher.
If you use two pairs of speakers, the impedance of
each speaker must be 8Ω or higher.
(Left position)
If you use one pair of speakers, the impedance of
each speaker must be 6Ω or higher.
If you use two pairs of speakers, the impedance of
each speaker must be 12Ω or higher.
E-5
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
AX-496
1 2 3
4
5
7
NATURAL SOUND STEREO AMPLIFIER AX–496
STANDBY
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
PURE DIRECT
INPUT
CD/DVD DIRECT AMP
POWER
ON
OFF
VOLUME
l6
20
l2
SPEAKERS
BASS
0
TREBLE
0
BALANCE
0
LOUDNESS
FLAT
REC OUT
CD/DVD
PHONES
28
8
2
TAPE
TUNER
PHONO
l
l
l
l
l
l
l
—30dB
I0
A
B
2
2
2
2
2
2
2
MD
AUX
3
3
3
3
3
3
3
9
STANDBY/ON
4
40
4
4
4
4
4
4
4
8
ON
OFF
5
5
5
5
L
5
5
R
5
7
6
60
0
–dB
8
9
0
A
B
C
D E
F
G
AX-396
1 2 3
4
6
7
NATURAL SOUND STEREO AMPLIFIER AX–396
STANDBY
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
TAPE MONITOR
INPUT
CD/DVD DIRECT AMP
POWER
ON
OFF
VOLUME
l6
20
l2
SPEAKERS
BASS
0
TREBLE
0
BALANCE
0
LOUDNESS
FLAT
PHONES
28
8
2
l
l
l
l
l
l
l
—30dB
I0
A
B
2
2
2
2
2
2
2
3
3
3
3
3
3
3
9
STANDBY/ON
4
40
4
4
4
4
4
4
4
8
ON
OFF
5
5
5
5
L
5
5
R
5
7
6
60
0
–dB
8
9
0
A
B
C
E
F
G
E-6
PHONES
1 POWER
Press this switch inward (ON) to use this unit. In this
9 PHONES jack
When you listen with
headphones, connect the
headphones to the
PHONES jack and set both
SPEAKERS A and B
switches to the OFF
position.
state, you can turn on this unit or turn this unit in the
standby mode by pressing STANDBY/ON. Press this
switch to release it outward (OFF) to completely cut off
this unit’s power supply from the AC line.
2 STANDBY indicator
Lights up only while this unit is in the standby mode.
0 SPEAKERS
3 STANDBY/ON
Press the switch A or B (or both) inward (ON) for the
speakers you will use. Press and release the switch
outward (OFF) for the speakers you do not use.
Press this switch to turn on the power. Press again to
set this unit in the standby mode.
* This switch can be used only when POWER is set in
the ON position.
A Tone controls
BASS
Standby mode
Rotate this knob to increase or decrease the low
frequency response. The 0 position produces a flat
response.
This unit is still using a small amount of power in this
mode in order to be ready to receive infrared-signals
from the remote control.
TREBLE
Rotate this knob to increase or decrease the high
frequency response. The 0 position produces a flat
response.
4 Input source indicators
The indicator of the currently selected input source
lights up.
B BALANCE
5 PURE DIRECT and indicator AX-496 only
Press this switch, and the indicator above it lights up.
You can listen to a source in the purest sound with this
function. (Refer to page 12 for details.)
The balance of the output volume to the left and right
speakers can be adjusted to compensate for sound
imbalances caused by the speaker location or listening
room conditions.
Press this switch again to cancel this function.
C LOUDNESS
6 TAPE MONITOR and indicator AX-396 only
Press this switch to turn on the indicator above it. You
can listen to the sound played on the tape deck
connected to the TAPE terminals on the rear of this
unit. When the tape deck is used for recording, you
can also monitor the sound being recorded.
* To listen to the source selected with the INPUT
selector, press this switch again to turn off the
indicator.
Used to compensate for the human ears’ loss of
sensitivity to high and low-frequency ranges at low
volume. (Refer to page 12 for details.)
D REC OUT selector AX-496 only
Rotate this knob to select the source for recording to
an MD recorder or tape deck. This setting is
independent of the INPUT selector setting, so this
function allows you to record the selected source while
listening to another source.
* When this function is on (the indicator is illuminated),
the tape deck (TAPE) cannot be selected with the
INPUT selector.
* When the tape deck (TAPE) is selected with the
INPUT selector, this function will not turn on even if
TAPE MONITOR is pressed.
E Front cover
Refer to inside of the front cover on how to open and
close the front cover.
F INPUT selector
7 CD/DVD DIRECT AMP and indicator
Turn this knob to select the input source.
The selected source will be shown by the lighting of
corresponding input source indicator.
Press this switch, and the indicator above it lights up.
You can listen to a CD or DVD source in the purest
sound with this function. (Refer to page 12 for details.)
Press this switch again to cancel this function.
G VOLUME
Turn this knob to raise or lower the volume level. (The
REC OUT level is not affected.)
8 Remote control sensor
Receives signals from the remote control.
E-7
REMOTE CONTROL
The remote control is designed to control the most commonly used functions of the main unit. If you have a YAMAHA CD
player, tuner, tape deck, etc. with remote control compatibility, this remote control will also control their various functions.
For Control of This Unit
1 STANDBY/ON
STANDBY/ON
Press this key to turn on this unit or turn it into the
1
standby mode.
This key can be used only when the POWER switch on
DECK A/B
the main unit is set in the ON position.
TAPE
Standby mode
1
In this state, this unit consumes a very small
DIR A
DIR B
quantity of power to receive infrared-signals from
the remote control.
DISC SKIP
CD
2 Input selector keys
Press a key to select the input source.
2
3
3 VOLUME +/–
Press these keys to increase or decrease the volume.
–
PRESET
+
A/B/C/D/E
TUNER
For Control of Other Components
MD
TAPE
CD/DVD
TUNER
Note
The functions of the keys to control other YAMAHA
components are the same as the corresponding keys on
those components. Refer to those components’
instruction manuals for details.
2
3
AUX
PHONO
VOLUME
–
+
1 Tape deck keys
These keys control tape decks.
* DIR A, B and A/B apply only to double cassette tape
decks.
* Pressing DIR A will reverse the tape direction on a
single cassette tape deck with the automatic reverse
function.
2 CD player keys
These keys control compact disc players.
* DISC SKIP is used for disc changers only.
3 Tuner keys
These keys control tuners.
PRESET +: Press this key to select the next preset
station number.
PRESET –: Press this key to select the previous
preset station number.
A/B/C/D/E: Press this key to select the group (A – E)
of preset station numbers.
E-8
OPERATION
Ⅵ Playing a source
AX-496 AX-396
PURE DIRECT
TAPE MONITOR
8
STANDBY
5 8 4
STANDBY
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
CD/DVD DIRECT AMP
POWER
ON
OFF
8
INPUT
VOLUME
l6
2
3
20
l2
SPEAKERS
BASS
0
TREBLE
0
BALANCE
0
LOUDNESS
FLAT
PHONES
28
8
2
l
l
l
l
l
l
l
—30dB
I0
A
B
2
2
2
2
2
2
2
3
3
3
3
3
3
3
9
STANDBY/ON
4
40
4
4
4
4
4
4
4
8
ON
OFF
5
5
5
5
L
5
5
R
5
7
6
1, 7
60
0
–dB
4
l6
20
l2
5
Select speakers A or B.
1
28
8
2
SPEAKERS
4
40
A
B
60
0
ON
OFF
–dB
Set to the “ ” position.
∞
* Both speakers A and B can be selected.
* Be sure that the IMPEDANCE SELECTOR switch is
correctly set as explained on page 5.
2
3
Press POWER inward (ON).
STANDBY
* If you listen with headphones, press both switches to
release them outward (OFF).
POWER
ON
OFF
6
7
Play the source.
If the STANDBY indicator is illuminated, press
STANDBY/ON to turn on the power. (The STANDBY
l6
indicator turns off.)
20
l2
28
8
2
VOLUME
–
+
STANDBY/ON
4
40
STANDBY/ON
–
–
+
60
0
–dB
Adjust the output level.
8
Adjust the tonal quality by using the BASS,
Turns off.
STANDBY
TREBLE, BALANCE, LOUDNESS controls or the
CD/DVD DIRECT AMP switch (or PURE DIRECT
switch for AX-496 only). (Refer to page 12).
POWER
4
Select the desired input source.
AX-396 only
If the TAPE MONITOR indicator is illuminated when you
listen to a source, press TAPE MONITOR to turn off the
TAPE MONITOR indicator.
MD
TAPE
CD/DVD
UNER
AUX
PHON
–
+
When you finish using this unit
Press STANDBY/ON again to set this unit in the standby
mode. (The STANDBY indicator lights up.)
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
To completely cut off this unit’s power
supply from the AC line
The indicator of the selected source lights up.
Press POWER to release it outward (OFF).
E-9
Ⅵ Recording a source to tape (or MD)
3, 5, 6
AX-496
STANDBY
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
PURE DIRECT
CD/DVD DIRECT AMP
POWER
ON
OFF
INPUT
VOLUME
l6
20
l2
SPEAKERS
BASS
0
TREBLE
0
BALANCE
0
LOUDNESS
FLAT
REC OUT
CD/DVD
PHONES
28
8
TAPE
TUNER
PHONO
l
l
l
l
l
l
l
—30dB
I0
A
B
2
2
2
2
2
2
2
MD
AUX
3
3
3
3
3
3
3
9
STANDBY/ON
4
40
4
4
4
4
4
4
4
8
ON
OFF
5
5
5
5
L
5
5
R
5
7
6
60
2
0
–dB
1
3
4
5
Begin recording on the tape deck (or MD recorder).
1
Select the source you want to record.
REC OUT
CD/DVD
TAPE
MD
AUX
TUNER
PHONO
The sound of the recording can be monitored by
selecting the tape deck (or MD recorder) with the
INPUT selector.
MD
TAPE
CD/DVD
ER
2
3
Play the source.
AUX
NO
–
+
Select the source with the INPUT selector and
adjust VOLUME to check the sound output.
6
Listening to another source by selecting it with the
MD
TAPE
CD/DVD
UNER
INPUT selector will not affect the recording.
AUX
PHON
–
+
l6
20
l2
28
8
2
VOLUME
–
+
4
40
–
60
0
–dB
E-10
1 4
AX-396
STANDBY
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
TAPE MONITOR
CD/DVD DIRECT AMP
POWER
ON
OFF
INPUT
VOLUME
l6
20
l2
SPEAKERS
BASS
0
TREBLE
0
BALANCE
0
LOUDNESS
FLAT
PHONES
28
8
2
l
l
l
l
l
l
l
—30dB
I0
A
B
2
2
2
2
2
2
2
3
3
3
3
3
3
3
9
STANDBY/ON
4
40
4
4
4
4
4
4
4
8
ON
OFF
5
5
5
5
L
5
5
R
5
7
6
60
0
–dB
1 2
3
4
Begin recording on the tape deck (or MD recorder).
1
Select the source you want to record.
If the tape deck is used for recording, you can
monitor the sound of recording.
To monitor the sound of recording, light up the TAPE
MONITOR indicator by pressing TAPE MONITOR.
MD
TAPE
CD/DVD
UNER
AUX
PHON
–
+
TAPE MONITOR
AUX
MD
TAPE
CD/DVD
TUNER
PHONO
Note
Turn off the TAPE MONITOR indicator when the recording
is finished by pressing TAPE MONITOR.
2
Play the source and then turn VOLUME up to check
the sound output.
l6
20
l2
28
8
VOLUME
–
+
4
40
–
2
60
0
–dB
Notes on recording
● The VOLUME, BASS,TREBLE, BALANCE, LOUDNESS
controls and CD/DVD DIRECT AMP switch (and PURE
DIRECT switch for AX-496 only) have no effect on the
material being recorded.
● Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright material may infringe on copyright laws.
E-11
Ⅵ Sound control
Adjusting the BALANCE control
Adjusting the BASS and TREBLE controls
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
BASS
TREBLE
0
0
l
l
l
l
2
2
2
2
3
3
3
3
BALANCE
4
4
4
4
5
5
5
5
0
l
l
2
2
BASS:
Turn this knob clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
3
3
4
4
L
5
5
R
TREBLE: Turn this knob clockwise to increase (or counter
clockwise to decrease) the high frequency
response.
Using the CD/DVD DIRECT AMP switch
You can enjoy the purest possible sound from your CD or
DVD player by pressing this switch. The indicator above it
lights up. With this function on, input signals from the CD or
DVD player are sent directly to the built-in special amplifier
for CD/DVD bypassing the INPUT selector, the BASS,
TREBLE, BALANCE and LOUDNESS controls (and the
TAPE MONITOR switch for AX-396 only), and then sent to
the power amplifier. This signal routing reproduces the
purest sound eliminating any alterations to the CD or DVD
signals.
Adjusting the continuously variable
LOUDNESS control
This control compensates for the human ears’ loss of
sensitivity to high and low-frequency ranges at low volume.
This control is adjustable to retain full tonal range at any
volume level.
LOUDNESS
1
FLAT
Set to the “FLAT” position.
l
—30dB
I0
CD/DVD DIRECT AMP
2
3
9
8
4
5
7
6
l6
20
l2
2
3
28
8
2
Using the PURE DIRECT switch
AX-496 only
Set to the loudest listening level
that you would listen to.
4
40
60
You can enjoy the purest possible sound from your audio
sources by pressing this switch. The indicator above this
switch lights up. With this function on, the audio signals
bypass the BASS,TREBLE, BALANCE and LOUDNESS
controls, thus eliminating any alterations to the audio
signals.
0
–dB
LOUDNESS
FLAT
l
—30dB
I0
Turn until the desired volume is
obtained.
2
3
9
4
8
5
7
PURE DIRECT
6
Note
WARNING
If both the CD/DVD DIRECT AMP and PURE DIRECT
switches are on, only the CD/DVD DIRECT AMP switch will
function.
If the CD/DVD DIRECT AMP switch (or PURE DIRECT
switch for AX-496 only) is pressed to turn it on with the
LOUDNESS control set at a certain level, the sound will
suddenly increase and may damage your ears or the
speakers. (The LOUDNESS control function may be
bypassed.) For this reason, be sure to press the CD/
DVD DIRECT AMP switch (or PURE DIRECT switch for
AX-496 only) after lowering the volume or after checking
that the LOUDNESS control is properly set.
E-12
TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if
the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service
center.
Problem
Cause
What to Do
Power cord is not plugged in nor
completely inserted.
The unit cannot be turned on or
turns off suddenly soon after the
power is turned on.
Firmly plug in the power cord.
The IMPEDANCE SELECTOR switch on Set the switch to either end when this
the rear panel is not set to either end.
unit is off.
This unit does not work normally.
There is an influence of strong external
noise (lightning, excessive static
Turn off this unit by pressing the
POWER switch. After about 30 seconds
electricity, etc.) or a misoperation on this have passed, turn on this unit and
unit while using this unit.
operate this unit again.
No sound.
Incorrect output cord connections.
Connect the cords properly. If the
problem persists, the cords may be
defective.
Appropriate input source is not selected.
Select an appropriate input source with
the INPUT selector.
The SPEAKERS switches are not set
properly.
Set the corresponding SPEAKERS
switch to the ON position.
Speaker connections are not secure.
Secure the connections.
The sound suddenly goes off.
The protection circuit has been activated Turn off this unit by pressing the
because of short circuit etc.
POWER switch, and then turn this unit
on to reset the protection circuit.
Only one of the speakers
produces the sound.
Incorrect setting of the BALANCE
control.
Adjust it to the appropriate position.
Incorrect cord connections.
Connect the cords properly. If the
problem persists, the cords may be
defective.
There is a lack of bass and no
ambience.
The + and – wires are connected in
reverse at the amplifier or speakers.
Connect the speaker wires in the
correct phase (+ and –).
Sound “hums”.
Incorrect cord connections.
Firmly connect the audio plugs. If the
problem persists, the cords may be
defective.
No connection from the turntable to the
GND terminal.
Make the GND connection between the
turntable and this unit.
The volume level is low while
playing a record.
The record is being played on a
turntable with an MC cartridge.
The turntable should be connected to
this unit through the MC head amplifier.
The volume level cannot be
increased, or sound is distorted.
The component connected to the TAPE
OUT or MD OUT terminals of this unit is
turned off.
Turn on the power to the component.
The sound is degraded when
listening with the headphones
connected to the compact disc
player or tape deck that are
connected with this unit.
This unit is turned off or in the standby
mode.
Turn on the power to this unit.
Sound level is low.
The LOUDNESS control is functioning.
Set the LOUDNESS control to the FLAT
position.
The input source cannot be
changed, though the INPUT
selector is turned.
The CD/DVD DIRECT AMP switch is
ON.
Switch off the CD/DVD DIRECT AMP
switch.
Using the BASS, TREBLE,
BALANCE and LOUDNESS
controls does not affect the tone.
The CD/DVD DIRECT AMP switch (or
PURE DIRECT switch for AX-496 only)
is ON.
The CD/DVD DIRECT AMP switch (or
PURE DIRECT switch for AX-496 only)
must be switched OFF to use those
controls.
The remote control does not
work.
The batteries of this remote control are
weak.
Replace the batteries with new ones.
The remote control does not
function properly.
Wrong distance or angle.
The remote control will function from a
maximum range of 6 meters and no
more than 30 degrees off-axis from the
front panel.
Direct sunlight or lighting (of an inverter
type fluorescent lamp etc.) is striking the
remote control sensor of the main unit.
Reposition of the main unit.
E-13
SPECIFICATIONS
Power Section
Control Section
Minimum RMS Output Power
Input Sensitivity/Impedance
8Ω, 20 Hz to 20 kHz, 0.019% THD
<AX-496> ...................................................... 85W+85W
<AX-396> ...................................................... 60W+60W
CD/DVD, etc. ............................................... 150 mV/47 kΩ
PHONO ........................................................ 2.5 mV/47 kΩ
Output Level
Maximum Output Power (EIAJ)
(1 kHz, 10% THD)
REC OUT ................................................... 150 mV/1.6 kΩ
<AX-496>
Headphone Output.............................................0.25V/680Ω
8/6Ω ........................................................................ 130/150W
<AX-396>
Channel Separation (1 kHz/10 kHz)
CD/DVD (Input 5.1 kΩ Terminated) ................ 65 dB/50 dB
6Ω ................................................................................... 110W
Dynamic Power (IHF)
Tone Control Characteristics
8/6/4/2Ω
BASS ........................................................
ע 10 dB (20 Hz) TREBLE..................................................
ע 10 dB (20 kHz) <AX-496> ........................................ 130/150/185/220W
<AX-396> ........................................ 100/120/140/150W
Continuous LOUDNESS Control
DIN Standard Output Power
Attenuation ................................................ –30 dB (1 kHz)
(4Ω, 1 kHz, 0.7% THD)
<AX-496>................................................................ 120W
<AX-396>.................................................................. 95W
General
Power Supply
IEC Output Power (8Ω, 1 kHz, 0.019% THD)
[Europe and U.K. models]......................... AC 230V, 50 Hz
[Australia model] ....................................... AC 240V, 50 Hz
[China model] ........................................... AC 220V, 50 Hz
[General model] .............. AC 110/120/220/240V, 60/50 Hz
<AX-496>................................................................ 100W
<AX-396>.................................................................. 75W
Power Band Width
8Ω, Half power, 0.04% THD ...................... 10 Hz to 50 kHz
Power Consumption
<AX-496>.................................................. Approx. 210W
<AX-396>.................................................. Approx. 150W
Damping Factor
8Ω, 20 Hz to 20 kHz ..................................................... 240
AC Outlets
Frequency Response .................... 20 Hz to 20 kHz
ע 0.5 dB 3 SWITCHED OUTLETS
[Europe, China and General models]..... 100W max. total
1 SWITCHED OUTLET
Total Harmonic Distortion (20 Hz to 20 kHz)
CD/DVD to SP OUT (8Ω, Half power).....................0.008%
[U.K. and Australia models] .................... 100W max. total
Signal-to-Noise Ratio (IHF-A Network)
Dimensions (W x H x D) ....................... 435 x 151 x 391 mm
(17-1/8” x 5-15/16” x 15-3/8”)
CD/DVD (Input Shorted, CD/DVD DIRECT AMP: ON)
............................................................................... 110 dB
PHONO (Input Shorted) .......................................... 88 dB
Weight
<AX-496>.................................................. 9.5 kg (21 lbs.)
<AX-396>......................................... 8.7 kg (19 lbs. 3 oz.)
Residual Noise (IHF-A Network)
CD/DVD DIRECT AMP: ON..................................... 35 µV
Accessories.................................................. Remote control
Batteries
Specifications subject to change without notice.
E-14
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
|