RANGE
COMPOSITION
The range consists of 4 models of
work tables with upstand and a bowl
positioned on the right or left hand
side, 1400 or 1800 mm in length.
The highly modular design of the
tables guarantees a rational solution
to any food preparation or support
function in the professional kitchen.
Upstand with 8 mm radioused
corner, 100 mm high and 13 mm
deep, designed to be used against a
wall.
Model 132200+855300
1400&1800 mm
ZANUSSI
WORK TABLES WITH BOWL
P R O F E S S I O N A L
wide, a lower shelf, a three sided
underframe and a set of castors as
an alternative to the feet. Different
taps are avialable to suit every need.
� The drawers, in 304 AISI stainless
steel with a one-piece interior and
rounded corners for greater hygiene
and ease of cleaning, are designed
to contain GN containers with a
maximum height of 100 mm. They
have a maximum load capacity of 40
kg.
of 200 mm from the floor. Smooth
shelves are normally supplied,
perforated ones are available on
request. For installation of the chest
of drawers the lower shelf must be
ordered as well.
� All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� The 40 mm high worktop in 304
AISI stainless steel, 10/10 in
thickness, incorporates a layer of
sound deadening material, has
upturned edges to protect the
kitchen worker and a reinforced,
waterproof under panel.
� Square section legs and 1"
height-adjustable feet (40 mm) in
304 AISI stainless steel to allow
perfect alignment with other food
preparation equipment.
� The single-pressed bowl (400 x
400 x 200 mm) is supplied as
standard with an overflow pipe and
drain hole.
� Ease and speed of installation
guaranteed by the fact that the table
top slots into the legs without using
screws.
� The lower shelf, 40 mm in
thickness, slots easily into place,
without the use of tools, at a height
TECHNICAL DATA
CHARACTERISTICS
MODELS
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
External dimensions - mm
width
depth
height
1400
700
1000
50
1400
700
1000
50
1800
700
1000
50
1800
700
1000
50
Worktop thickness - mm
Upstand dimensions - mm
height
100
13
100
13
100
13
100
13
depth
� All work tables can be fitted, as
optional extras, with a single drawer
either 400 or 600 mm wide, a chest
of 4 drawers either 400 or 600 mm
radius
Bowls - n.
R=8
1
R=8
1
R=8
1
R=8
1
Bowl dimensions (wxdxh) - mm
Net weight - kg.
400x400xH200 400x400xH200 400x400xH200 400x400xH200
45 45 54 54
132300
132301
700
1400
700
1400
50
40
40
50
40
40
540
540
440
440
12
12
120
400
400
120
132306
132307
700
1800
700
1800
50
50
40
40
40
40
540
540
440
440
12
12
120
400
400
120
LEGEND
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
A - Hot water inlet
B - Cold water inlet
C - Water drain
3/4"
3/4"
1"1/2
3/4"
3/4"
1"1/2
3/4"
3/4"
1"1/2
3/4"
3/4"
1"1/2
OPTIONAL ACCESSORIES
ACCESSORIES
MODELS
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
3-SIDED UNDERFRAME FOR 1400 MM TABLES
3-SIDED UNDERFRAME FOR 1800 MM TABLES
CHEST 4 DRAWERS (S/S RUNNERS) 600 MM
CHEST 4 DRAWERS(S/S RUNNERS) GN1/1 400MM
DRAWER (GALVANIZED RUNNERS) 600 MM
DRAWER (GALVANIZED RUNNERS) GN 1/1 400MM
DRAWER (S/S RUNNERS) 600 MM
DRAWER (S/S RUNNERS) GN 1/1 400 MM
ELBOW OP.MIX.TAP+SHORT SPOUT-3/4" HOLE
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4"
LOWER SHELF FOR 1400 MM TABLES
855044
855044
855048
855813
855812
855903
855902
855811
855810
855323
855328
855048
855813
855812
855903
855902
855811
855810
855323
855328
855813
855812
855903
855902
855811
855810
855323
855328
855014
855813
855812
855903
855902
855811
855810
855323
855328
855014
LOWER SHELF FOR 1800 MM TABLES
855018
855317
855319
855325
855326
855315
855308
855306
855310
855018
855317
855319
855325
855326
855315
855308
855306
855310
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE
MIXER TAP(INFRARED)+SPOUT 3/4"SING.HOLE
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE
PRE-WASH SPRAY UNIT,SINGLE HOLE
SINGLE BRASS DRAIN SYPHON 1,5"
SINGLE PLASTIC DRAIN SYPHON 1,5"
WALL MIXER TAP WITH SWIVEL SPOUT 3/4"
855317
855319
855325
855326
855315
855308
855306
855310
855317
855319
855325
855326
855315
855308
855306
855310
ZANUSSI
P R O F E S S I O N A L
AAAD1
2009-06-19
The Company reserves the right to alter technical specifications without prior notice.
|