Item #_____________ C.S.I. Section 11420
COMMANDER SERIES
18" WIDE HEAVY-DUTY
CABINET BASE GAS RANGE
BASIC MODEL:
FS-2J-0-18
Two open burners
KEY FEATURES:
➤
Stainless steel front, sides, bullnose, stub back and 6" ad-
justable legs. Sides finished in black epoxy powder coat
paint.
➤
➤
11⁄4" diameter front gas manifold.
Two 30,000 BTU/hr. two piece burners. Individual pilot for
each burner.
➤
➤
Heavy-duty cast iron top grate measures 18"w x 27"d.
One year limited parts and labor warranty.
OPTIONAL FEATURES:
➤
➤
➤
➤
➤
➤
Elevated rear 4" (step-up) burner.
Stainless steel door on cabinet base.
Stainless steel finishing back.
Stainless steel intermediate shelf.
Stainless steel bottom.
Common stainless steel bullnose up to 120" wide. (Provide
a drawing showing the position of each piece of equipment
in the line-up with the order.)
➤
➤
➤
➤
➤
Cap and cover manifold end(s). (No charge.)
Leveling bolts in place of legs for curb installation.
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 96" wide.
Rear gas connection. (Specify 3⁄4" or 11⁄4".)
Model FS-2J-0-18
DESCRIPTION:
18" wide heavy-duty gas range with cabinet base, Wolf Model
No. FS-2J-0-18. Stainless steel front, sides, bullnose, stub back
and 6" adjustable legs. 11⁄4" diameter front gas manifold. Two
30,000 BTU/hr. two piece burners, total input 60,000 BTU/hr.
Individual pilot for each burner. Heavy-duty cast iron top grate
measures 18"w x 27"d.
Design Certified by the American Gas Association
Design Certified by the Canadian Gas Association
Listed by the National Sanitation Foundation
Exterior dimensions: 18"w x 38"d x 36" working height on
6" adjustable legs.
Approved by ______________________
Date: _____________________________
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
Wolf Range Company
Division of ITW Food Equipment Group LLC
(800) 366-9653
F-39110 (9/05)
|